Distributed by Mattingly Graphics, Somers, CT. You save 10% over manufacturer's cost. Full manufacturer's guarantee.

MATERIAL
* All animals are printed on self-adhesive, peel and stick polyester.
* The stickers are designed for indoor use on any flat, clean, dry surface.

ADHESIVE
* The stickers are removable.
* Adhesive will not remain on the wall when the stickers are removed.

APPLYING STICKERS
* Adheres to almost any smooth surface such as metal, wood, glass, cardboard, paper, plastic etc.
* To apply, simply remove the backing and stick it on!
* Product includes simple application instructions. Only apply the sticker to a smooth, clean and dry surface. The sticker may not adhere properly if applied to uneven or textured surfaces. If the walls have been painted within 4 weeks, please use the Super 77 adhesive as explained below. Please do not place a sticker within reach of a young child's crib or bed.

APPLICATION INSTRUCTIONS
Remove entire backing. Be careful not to bend or kink the sticker. After backing is removed, press exposed sticker to surface. Finish by softly rubbing the entire sticker with a soft cloth, making sure to include all edges. On the larger stickers it may be easier to peel and stick a top portion first and then remove the remaining backing. Finish by rubbing with a soft cloth. If, after completion, you are unhappy with the positioning, simply remove and stick again. If the sticker does not stick well or curls at the edges, follow the instructions below.

TO APPLY TO ROUGH OR GLOSSY SURFACES:
The stickers work best on flat walls with clean, dry flat paint. They will work on other surfaces with varying degrees of success. When you get your order, try a small sticker. If it doesn't stick well, there is a product that can be used to increase the adhesion. This product creates a stronger bond, but can still be removed. You can get it at Staples or other office supply stores. It is made by 3M and it is called Super77. Put the sticker on the wall. Spray some adhesive into a paper cup. Using a small 1/2" brush, lift the edge of the sticker off the wall and paint the adhesive on the back of the sticker. Push the edge back on the wall. The sticker will stick within a few minutes as the adhesive dries. Be careful not to get Super77 on the face of the sticker. Paint thinner can be used to clean excess glue, but may damage the sticker. If the walls are very glossy, you can try using Hi-Strength 90 by 3M. We recommend that this procedure be used in high traffic and commercial installations such as nursery schools and pediatric centers.

TO CLEAN STICKERS:
Use a cloth or paper towel moistened with water only and gently blot. Do not soak, rub or use soap or abrasives. The stickers can be damaged by moisture. We recommend keeping them dry.

MANUFACTURER'S WARRANTY
We take pride in our products. In the event that a product is defective in material or workmanship, liability is limited to the replacement of the same product.

RETURNS
We will accept returns for a full refund less shipping costs if the items are returned undamaged. Just ship them back to us.

SHIPPING
We can ship almost anywhere in the world. Email us for shipping costs to your country. All prices in US dollars.

return to top